35mm equivalent focal length (mm) to Focal length (mm) for 1-inch sensor 13.2mm
1 35mm equivalent focal length (mm) = 0.3663 Focal length (mm) ยท camera-equivalence calculation for 1-inch sensor 13.2mm
Direct Answer
On 1-inch sensor 13.2mm, a 50 mm full-frame equivalent needs about a 18.315018 mm lens
This result uses the fixed 1-inch sensor 13.2mm sensor profile (crop factor 2.73).
To match 14 35mm equivalent focal length (mm), you need 5.128205 Focal length (mm) on 1-inch sensor 13.2mm.
Converter Calculator
0.3663 Focal length (mm)
SwitchExplanation
Formula: focal_mm = equivalent_mm / 2.73. Why: this page keeps 1-inch sensor 13.2mm fixed, so crop factor and sensor width stay explicit for every calculation.
1-inch sensor 13.2mm: a sensor profile with crop factor 2.73 and sensor width (horizontal) 13.2 mm, used as the fixed framing basis for this page.
35mm equivalent focal length (mm): a camera-equivalence quantity in this family that depends on the selected crop model.
Focal length (mm): a camera-equivalence quantity in this family that depends on the selected crop model.
This route is useful when you know the full-frame equivalent focal length and need the actual lens focal length on 1-inch sensor 13.2mm.
This page is sensor-profile dependent rather than universal because camera equivalence changes with sensor geometry (1-inch sensor 13.2mm).
Common Conversion Values
| 35mm equivalent focal length (mm) | Focal length (mm) |
|---|---|
| 14 | 5.128205 |
| 24 | 8.791209 |
| 28 | 10.25641 |
| 35 | 12.820513 |
| 50 | 18.315018 |
| 70 | 25.641026 |
| 85 | 31.135531 |
| 135 | 49.450549 |
| 200 | 73.260073 |
Frequently Asked Questions
Which sensor assumptions are fixed for full-frame equivalent mm to focal length mm?
Full-frame equivalent mm to focal length mm is fixed to 1-inch sensor 13.2mm, crop factor 2.73, sensor width 13.2 mm.
How do I reverse eq mm to mm for 1-inch sensor 13.2mm?
Use the opposite-direction page for 1-inch sensor 13.2mm to convert focal length (mm) back to 35mm equivalent focal length (mm) with the same sensor assumptions.
Can full-frame equivalent mm to focal length mm replace full lens-design simulation?
No. Full-frame equivalent mm to focal length mm provides framing and geometry approximations, not full optical-model behavior.