Cubic Centimeters to Grams for Glycerin
Snapshot
For Glycerin, 1 Cubic Centimeter equals about 1.26 Grams. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Glycerin at 1,260 kg/m^3.
- Example: For 0.1 Cubic Centimeters of Glycerin, the result is 0.126 Grams.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
1.26 Grams (Glycerin)
SwitchExplanation
The converter converts grams of Glycerin from cubic centimeters using one fixed density basis of 1260 kg/m^3. The same density model is used in the calculator, common values, and mirror page so weight, mass, and volume checks stay aligned.
Typical glycerin density near room temperature.
Common Conversion Values
| Cubic Centimeters (Glycerin) | Grams (Glycerin) |
|---|---|
| 0.1 | 0.126 |
| 0.25 | 0.315 |
| 0.5 | 0.63 |
| 1 | 1.26 |
| 2 | 2.52 |
| 5 | 6.3 |
| 10 | 12.6 |
| 25 | 31.5 |
| 50 | 63 |
| 100 | 126 |
Glycerin density and calculation basis
Glycerin is represented in this table by a fixed reference density of 1260 kg/m^3, equivalent to 1.26 g/cm^3. Typical glycerin density near room temperature.
At this fixed reference, 1 liter of Glycerin corresponds to 1.26 kg, while 1 kg corresponds to 0.793651 liters. Its table density is 26.4% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 17 fixed table records labeled Liquids, the nearest density to Glycerin is Maple Syrup at 1330 kg/m^3: an absolute difference of 70 kg/m^3 (5.6% relative to Glycerin). 13 records have a lower fixed density and 3 have a higher one. The observed range in this labeled group is Gasoline at 745 kg/m^3 to Honey at 1420 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 1.26 g per cm^3.
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much g is 1 cm^3 of Glycerin?
1 cm^3 of Glycerin equals 1.26 g on this page.
What density does this Glycerin page use?
This page uses a fixed density of 1260 kg/m^3 for Glycerin.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/grams-to-cubic-centimeters/glycerin/) to convert in the opposite direction with the same fixed density basis.