Cubic Meters to Metric Tons for Maple Syrup
Snapshot
For Maple Syrup, 1 Cubic Meter equals about 1.33 Metric Tons. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Maple Syrup at 1,330 kg/m^3.
- Example: For 0.1 Cubic Meters of Maple Syrup, the result is 0.133 Metric Tons.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
1.33 Metric Tons (Maple Syrup)
SwitchExplanation
The converter converts metric tons of Maple Syrup from cubic meters using one fixed density basis of 1330 kg/m^3. The same density model is used in the calculator, common values, and mirror page so weight, mass, and volume checks stay aligned.
Representative syrup density at standard culinary concentration.
Common Conversion Values
| Cubic Meters (Maple Syrup) | Metric Tons (Maple Syrup) |
|---|---|
| 0.1 | 0.133 |
| 0.25 | 0.3325 |
| 0.5 | 0.665 |
| 1 | 1.33 |
| 2 | 2.66 |
| 5 | 6.65 |
| 10 | 13.3 |
| 25 | 33.25 |
| 50 | 66.5 |
| 100 | 133 |
Maple Syrup density and calculation basis
Maple Syrup is represented in this table by a fixed reference density of 1330 kg/m^3, equivalent to 1.33 g/cm^3. Representative syrup density at standard culinary concentration.
At this fixed reference, 1 liter of Maple Syrup corresponds to 1.33 kg, while 1 kg corresponds to 0.75188 liters. Its table density is 33.4% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 17 fixed table records labeled Liquids, the nearest density to Maple Syrup is Glycerin at 1260 kg/m^3: an absolute difference of 70 kg/m^3 (5.3% relative to Maple Syrup). 14 records have a lower fixed density and 2 have a higher one. The observed range in this labeled group is Gasoline at 745 kg/m^3 to Honey at 1420 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 1.33 t per m^3.
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much t is 1 m^3 of Maple Syrup?
1 m^3 of Maple Syrup equals 1.33 t on this page.
What density does this Maple Syrup page use?
This page uses a fixed density of 1330 kg/m^3 for Maple Syrup.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/metric-tons-to-cubic-meters/maple-syrup/) to convert in the opposite direction with the same fixed density basis.