Grams to US Pints for Acetone
Snapshot
For Acetone, 1 Gram equals about 0.002696 US Pints. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Acetone at 784 kg/m^3.
- Example: For 0.1 Grams of Acetone, the result is 0.00027 US Pints.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
0.002696 US Pints (Acetone)
SwitchExplanation
The converter converts grams of Acetone into us pints using one fixed density basis of 784 kg/m^3. The same density model is used in the calculator, common values, and mirror page so storage, batching, and material-planning checks stay aligned.
Typical acetone density near room temperature.
Common Conversion Values
| Grams (Acetone) | US Pints (Acetone) |
|---|---|
| 0.1 | 0.00027 |
| 0.25 | 0.000674 |
| 0.5 | 0.001348 |
| 1 | 0.002696 |
| 2 | 0.005391 |
| 5 | 0.013478 |
| 10 | 0.026956 |
| 25 | 0.067391 |
| 50 | 0.134782 |
| 100 | 0.269563 |
Acetone density and calculation basis
Acetone is represented in this table by a fixed reference density of 784 kg/m^3, equivalent to 0.784 g/cm^3. Typical acetone density near room temperature.
At this fixed reference, 1 liter of Acetone corresponds to 0.784 kg, while 1 kg corresponds to 1.27551 liters. Its table density is 21.4% lower than the 997 kg/m^3 water reference used in this dataset.
Among the 17 fixed table records labeled Liquids, the nearest density to Acetone is Isopropyl Alcohol at 786 kg/m^3: an absolute difference of 2 kg/m^3 (0.3% relative to Acetone). 1 records have a lower fixed density and 15 have a higher one. The observed range in this labeled group is Gasoline at 745 kg/m^3 to Honey at 1420 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 0.00269563 pt (US) per g.
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much pt (US) is 1 g of Acetone?
1 g of Acetone equals 0.00269563 pt (US) on this page.
What density does this Acetone page use?
This page uses a fixed density of 784 kg/m^3 for Acetone.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/us-pints-to-grams/acetone/) to convert in the opposite direction with the same fixed density basis.