Kilograms to Cubic Meters for Brick
Snapshot
For Brick, 1 Kilogram equals about 0.000556 Cubic Meters. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Brick at 1,800 kg/m^3.
- Example: For 0.1 Kilograms of Brick, the result is 0.000056 Cubic Meters.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
0.000556 Cubic Meters (Brick)
SwitchExplanation
The converter converts kilograms of Brick into cubic meters using one fixed density basis of 1800 kg/m^3. The same density model is used in the calculator, common values, and mirror page so storage, batching, and material-planning checks stay aligned.
Representative fired clay brick density.
Common Conversion Values
| Kilograms (Brick) | Cubic Meters (Brick) |
|---|---|
| 0.1 | 0.000056 |
| 0.25 | 0.000139 |
| 0.5 | 0.000278 |
| 1 | 0.000556 |
| 2 | 0.001111 |
| 5 | 0.002778 |
| 10 | 0.005556 |
| 25 | 0.013889 |
| 50 | 0.027778 |
| 100 | 0.055556 |
Brick density and calculation basis
Brick is represented in this table by a fixed reference density of 1800 kg/m^3, equivalent to 1.8 g/cm^3. Representative fired clay brick density.
At this fixed reference, 1 liter of Brick corresponds to 1.8 kg, while 1 kg corresponds to 0.555556 liters. Its table density is 80.5% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 11 fixed table records labeled Construction materials, the nearest density to Brick is Gravel at 1700 kg/m^3: an absolute difference of 100 kg/m^3 (5.6% relative to Brick). 4 records have a lower fixed density and 6 have a higher one. The observed range in this labeled group is Topsoil at 1200 kg/m^3 to Granite at 2750 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 0.00055556 m^3 per kg.
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much m^3 is 1 kg of Brick?
1 kg of Brick equals 0.00055556 m^3 on this page.
What density does this Brick page use?
This page uses a fixed density of 1800 kg/m^3 for Brick.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/cubic-meters-to-kilograms/brick/) to convert in the opposite direction with the same fixed density basis.