Kilograms to US Teaspoons for Brick
Snapshot
For Brick, 1 Kilogram equals about 112.713409 US Teaspoons. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Brick at 1,800 kg/m^3.
- Example: For 0.1 Kilograms of Brick, the result is 11.271341 US Teaspoons.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
112.713409 US Teaspoons (Brick)
SwitchExplanation
The converter converts kilograms of Brick into us teaspoons using one fixed density basis of 1800 kg/m^3. The same density model is used in the calculator, common values, and mirror page so storage, batching, and material-planning checks stay aligned.
Representative fired clay brick density.
Common Conversion Values
| Kilograms (Brick) | US Teaspoons (Brick) |
|---|---|
| 0.1 | 11.271341 (about 11 1/2 tsp) |
| 0.25 | 28.178352 (about 28 tsp) |
| 0.5 | 56.356705 (about 56 1/2 tsp) |
| 1 | 112.713409 (about 112.71 us teaspoons) |
| 2 | 225.426818 (about 225.43 us teaspoons) |
| 5 | 563.567045 (about 563.57 us teaspoons) |
| 10 | 1,127.13409 (about 1127.13 us teaspoons) |
| 25 | 2,817.835225 (about 2817.84 us teaspoons) |
| 50 | 5,635.67045 (about 5635.67 us teaspoons) |
| 100 | 11,271.340901 (about 11271.34 us teaspoons) |
Brick density and calculation basis
Brick is represented in this table by a fixed reference density of 1800 kg/m^3, equivalent to 1.8 g/cm^3. Representative fired clay brick density.
At this fixed reference, 1 liter of Brick corresponds to 1.8 kg, while 1 kg corresponds to 0.555556 liters. Its table density is 80.5% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 11 fixed table records labeled Construction materials, the nearest density to Brick is Gravel at 1700 kg/m^3: an absolute difference of 100 kg/m^3 (5.6% relative to Brick). 4 records have a lower fixed density and 6 have a higher one. The observed range in this labeled group is Topsoil at 1200 kg/m^3 to Granite at 2750 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 112.713409 tsp (US) per kg.
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much tsp (US) is 1 kg of Brick?
1 kg of Brick equals 112.713409 tsp (US) on this page.
What density does this Brick page use?
This page uses a fixed density of 1800 kg/m^3 for Brick.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/teaspoons-us-to-kilograms/brick/) to convert in the opposite direction with the same fixed density basis.