Metric Tons to Cubic Meters for Cast Iron
Snapshot
For Cast Iron, 1 Metric Ton equals about 0.138889 Cubic Meters. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Cast Iron at 7,200 kg/m^3.
- Example: For 0.1 Metric Tons of Cast Iron, the result is 0.013889 Cubic Meters.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
0.138889 Cubic Meters (Cast Iron)
SwitchExplanation
The converter converts metric tons of Cast Iron into cubic meters using one fixed density basis of 7200 kg/m^3. The same density model is used in the calculator, common values, and mirror page so storage, batching, and material-planning checks stay aligned.
Representative cast iron density.
Common Conversion Values
| Metric Tons (Cast Iron) | Cubic Meters (Cast Iron) |
|---|---|
| 0.1 | 0.013889 |
| 0.25 | 0.034722 |
| 0.5 | 0.069444 |
| 1 | 0.138889 |
| 2 | 0.277778 |
| 5 | 0.694444 |
| 10 | 1.388889 |
| 25 | 3.472222 |
| 50 | 6.944444 |
| 100 | 13.888889 |
Cast Iron density and calculation basis
Cast Iron is represented in this table by a fixed reference density of 7200 kg/m^3, equivalent to 7.2 g/cm^3. Representative cast iron density.
At this fixed reference, 1 liter of Cast Iron corresponds to 7.2 kg, while 1 kg corresponds to 0.138889 liters. Its table density is 622.2% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 13 fixed table records labeled Metals, the nearest density to Cast Iron is Zinc at 7140 kg/m^3: an absolute difference of 60 kg/m^3 (0.8% relative to Cast Iron). 3 records have a lower fixed density and 9 have a higher one. The observed range in this labeled group is Aluminum at 2700 kg/m^3 to Gold at 19320 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 0.138889 m^3 per t.
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much m^3 is 1 t of Cast Iron?
1 t of Cast Iron equals 0.138889 m^3 on this page.
What density does this Cast Iron page use?
This page uses a fixed density of 7200 kg/m^3 for Cast Iron.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/cubic-meters-to-metric-tons/cast-iron/) to convert in the opposite direction with the same fixed density basis.