Metric Tons to US Pints for Maple Syrup
Snapshot
For Maple Syrup, 1 Metric Ton equals about 1,589.004826 US Pints. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Maple Syrup at 1,330 kg/m^3.
- Example: For 0.1 Metric Tons of Maple Syrup, the result is 158.900483 US Pints.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
1,589.004826 US Pints (Maple Syrup)
SwitchExplanation
The converter converts metric tons of Maple Syrup into us pints using one fixed density basis of 1330 kg/m^3. The same density model is used in the calculator, common values, and mirror page so storage, batching, and material-planning checks stay aligned.
Representative syrup density at standard culinary concentration.
Common Conversion Values
| Metric Tons (Maple Syrup) | US Pints (Maple Syrup) |
|---|---|
| 0.1 | 158.900483 |
| 0.25 | 397.251207 |
| 0.5 | 794.502413 |
| 1 | 1,589.004826 |
| 2 | 3,178.009652 |
| 5 | 7,945.024131 |
| 10 | 15,890.048262 |
| 25 | 39,725.120655 |
| 50 | 79,450.241311 |
| 100 | 158,900.482621 |
Maple Syrup density and calculation basis
Maple Syrup is represented in this table by a fixed reference density of 1330 kg/m^3, equivalent to 1.33 g/cm^3. Representative syrup density at standard culinary concentration.
At this fixed reference, 1 liter of Maple Syrup corresponds to 1.33 kg, while 1 kg corresponds to 0.75188 liters. Its table density is 33.4% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 17 fixed table records labeled Liquids, the nearest density to Maple Syrup is Glycerin at 1260 kg/m^3: an absolute difference of 70 kg/m^3 (5.3% relative to Maple Syrup). 14 records have a lower fixed density and 2 have a higher one. The observed range in this labeled group is Gasoline at 745 kg/m^3 to Honey at 1420 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 1,589.005 pt (US) per t.
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much pt (US) is 1 t of Maple Syrup?
1 t of Maple Syrup equals 1,589.005 pt (US) on this page.
What density does this Maple Syrup page use?
This page uses a fixed density of 1330 kg/m^3 for Maple Syrup.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/us-pints-to-metric-tons/maple-syrup/) to convert in the opposite direction with the same fixed density basis.