Metric Tons to US Pints for Plastic (PVC)
Snapshot
For Plastic (PVC), 1 Metric Ton equals about 1,531.432188 US Pints. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Plastic (PVC) at 1,380 kg/m^3.
- Example: For 0.1 Metric Tons of Plastic (PVC), the result is 153.143219 US Pints.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
1,531.432188 US Pints (Plastic (PVC))
SwitchExplanation
The converter converts metric tons of Plastic (PVC) into us pints using one fixed density basis of 1380 kg/m^3. The same density model is used in the calculator, common values, and mirror page so storage, batching, and material-planning checks stay aligned.
Representative rigid PVC density.
Common Conversion Values
| Metric Tons (Plastic (PVC)) | US Pints (Plastic (PVC)) |
|---|---|
| 0.1 | 153.143219 |
| 0.25 | 382.858047 |
| 0.5 | 765.716094 |
| 1 | 1,531.432188 |
| 2 | 3,062.864375 |
| 5 | 7,657.160938 |
| 10 | 15,314.321876 |
| 25 | 38,285.80469 |
| 50 | 76,571.609379 |
| 100 | 153,143.218758 |
Plastic (PVC) density and calculation basis
Plastic (PVC) is represented in this table by a fixed reference density of 1380 kg/m^3, equivalent to 1.38 g/cm^3. Representative rigid PVC density.
At this fixed reference, 1 liter of Plastic (PVC) corresponds to 1.38 kg, while 1 kg corresponds to 0.724638 liters. Its table density is 38.4% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 4 fixed table records labeled Polymers, the nearest density to Plastic (PVC) is Plastic (PET) at 1370 kg/m^3: an absolute difference of 10 kg/m^3 (0.7% relative to Plastic (PVC)). 3 records have a lower fixed density and 0 have a higher one. The observed range in this labeled group is Plastic (HDPE) at 950 kg/m^3 to Plastic (PVC) at 1380 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 1,531.432 pt (US) per t.
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much pt (US) is 1 t of Plastic (PVC)?
1 t of Plastic (PVC) equals 1,531.432 pt (US) on this page.
What density does this Plastic (PVC) page use?
This page uses a fixed density of 1380 kg/m^3 for Plastic (PVC).
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/us-pints-to-metric-tons/plastic-pvc/) to convert in the opposite direction with the same fixed density basis.