Ounces to US Pints for Olive Oil
Snapshot
For Olive Oil, 1 Ounce equals about 0.065839 US Pints. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Olive Oil at 910 kg/m^3.
- Example: For 0.1 Ounces of Olive Oil, the result is 0.006584 US Pints.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
0.065839 US Pints (Olive Oil)
SwitchExplanation
The converter converts ounces of Olive Oil into us pints using one fixed density basis of 910 kg/m^3. The same density model is used in the calculator, common values, and mirror page so storage, batching, and material-planning checks stay aligned.
Typical edible olive oil density near room temperature.
Common Conversion Values
| Ounces (Olive Oil) | US Pints (Olive Oil) |
|---|---|
| 0.1 | 0.006584 |
| 0.25 | 0.01646 |
| 0.5 | 0.032919 |
| 1 | 0.065839 |
| 2 | 0.131677 |
| 5 | 0.329193 |
| 10 | 0.658387 |
| 25 | 1.645967 |
| 50 | 3.291935 |
| 100 | 6.58387 |
Olive Oil density and calculation basis
Olive Oil is represented in this table by a fixed reference density of 910 kg/m^3, equivalent to 0.91 g/cm^3. Typical edible olive oil density near room temperature.
At this fixed reference, 1 liter of Olive Oil corresponds to 0.91 kg, while 1 kg corresponds to 1.098901 liters. Its table density is 8.7% lower than the 997 kg/m^3 water reference used in this dataset.
Among the 17 fixed table records labeled Liquids, the nearest density to Olive Oil is Ice at 917 kg/m^3: an absolute difference of 7 kg/m^3 (0.8% relative to Olive Oil). 7 records have a lower fixed density and 9 have a higher one. The observed range in this labeled group is Gasoline at 745 kg/m^3 to Honey at 1420 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 0.065839 pt (US) per oz.
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much pt (US) is 1 oz of Olive Oil?
1 oz of Olive Oil equals 0.065839 pt (US) on this page.
What density does this Olive Oil page use?
This page uses a fixed density of 910 kg/m^3 for Olive Oil.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/us-pints-to-ounces/olive-oil/) to convert in the opposite direction with the same fixed density basis.