Pounds to US Quarts for Brass
Snapshot
For Brass, 1 Pound equals about 0.056389 US Quarts. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Brass at 8,500 kg/m^3.
- Example: For 0.1 Pounds of Brass, the result is 0.005639 US Quarts.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
0.056389 US Quarts (Brass)
SwitchExplanation
The converter converts pounds of Brass into us quarts using one fixed density basis of 8500 kg/m^3. The same density model is used in the calculator, common values, and mirror page so storage, batching, and material-planning checks stay aligned.
Representative brass alloy density.
Common Conversion Values
| Pounds (Brass) | US Quarts (Brass) |
|---|---|
| 0.1 | 0.005639 |
| 0.25 | 0.014097 |
| 0.5 | 0.028194 |
| 1 | 0.056389 |
| 2 | 0.112778 |
| 5 | 0.281945 |
| 10 | 0.563889 |
| 25 | 1.409723 |
| 50 | 2.819445 |
| 100 | 5.638891 |
Brass density and calculation basis
Brass is represented in this table by a fixed reference density of 8500 kg/m^3, equivalent to 8.5 g/cm^3. Representative brass alloy density.
At this fixed reference, 1 liter of Brass corresponds to 8.5 kg, while 1 kg corresponds to 0.117647 liters. Its table density is 752.6% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 13 fixed table records labeled Metals, the nearest density to Brass is Bronze at 8800 kg/m^3: an absolute difference of 300 kg/m^3 (3.5% relative to Brass). 6 records have a lower fixed density and 6 have a higher one. The observed range in this labeled group is Aluminum at 2700 kg/m^3 to Gold at 19320 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, volume is calculated as mass divided by density after normalizing the units to kilograms and cubic meters. The resulting page multiplier is 0.056389 qt (US) per lb.
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much qt (US) is 1 lb of Brass?
1 lb of Brass equals 0.056389 qt (US) on this page.
What density does this Brass page use?
This page uses a fixed density of 8500 kg/m^3 for Brass.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/us-quarts-to-pounds/brass/) to convert in the opposite direction with the same fixed density basis.