US Teaspoons to Kilograms for Plastic (PVC)
Snapshot
For Plastic (PVC), 1 US Teaspoon equals about 0.006802 Kilograms. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Plastic (PVC) at 1,380 kg/m^3.
- Example: For 0.1 US Teaspoons of Plastic (PVC), the result is 0.00068 Kilograms.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
0.006802 Kilograms (Plastic (PVC))
SwitchExplanation
The converter converts kilograms of Plastic (PVC) from us teaspoons using one fixed density basis of 1380 kg/m^3. The same density model is used in the calculator, common values, and mirror page so weight, mass, and volume checks stay aligned.
Representative rigid PVC density.
Common Conversion Values
| US Teaspoons (Plastic (PVC)) | Kilograms (Plastic (PVC)) |
|---|---|
| 0.1 | 0.00068 |
| 0.25 | 0.0017 |
| 0.5 | 0.003401 |
| 1 | 0.006802 |
| 2 | 0.013604 |
| 5 | 0.03401 |
| 10 | 0.068019 |
| 25 | 0.170048 |
| 50 | 0.340096 |
| 100 | 0.680191 |
Plastic (PVC) density and calculation basis
Plastic (PVC) is represented in this table by a fixed reference density of 1380 kg/m^3, equivalent to 1.38 g/cm^3. Representative rigid PVC density.
At this fixed reference, 1 liter of Plastic (PVC) corresponds to 1.38 kg, while 1 kg corresponds to 0.724638 liters. Its table density is 38.4% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 4 fixed table records labeled Polymers, the nearest density to Plastic (PVC) is Plastic (PET) at 1370 kg/m^3: an absolute difference of 10 kg/m^3 (0.7% relative to Plastic (PVC)). 3 records have a lower fixed density and 0 have a higher one. The observed range in this labeled group is Plastic (HDPE) at 950 kg/m^3 to Plastic (PVC) at 1380 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00680191 kg per tsp (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much kg is 1 tsp (US) of Plastic (PVC)?
1 tsp (US) of Plastic (PVC) equals 0.00680191 kg on this page.
What density does this Plastic (PVC) page use?
This page uses a fixed density of 1380 kg/m^3 for Plastic (PVC).
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/kilograms-to-teaspoons-us/plastic-pvc/) to convert in the opposite direction with the same fixed density basis.