US Teaspoons to Kilograms for Sand (Dry)
Snapshot
For Sand (Dry), 1 US Teaspoon equals about 0.007886 Kilograms. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Sand (Dry) at 1,600 kg/m^3.
- Example: For 0.1 US Teaspoons of Sand (Dry), the result is 0.000789 Kilograms.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
0.007886 Kilograms (Sand (Dry))
SwitchExplanation
The converter converts kilograms of Sand (Dry) from us teaspoons using one fixed density basis of 1600 kg/m^3. The same density model is used in the calculator, common values, and mirror page so weight, mass, and volume checks stay aligned.
Typical dry bulk density; grading affects value.
Common Conversion Values
| US Teaspoons (Sand (Dry)) | Kilograms (Sand (Dry)) |
|---|---|
| 0.1 | 0.000789 |
| 0.25 | 0.001972 |
| 0.5 | 0.003943 |
| 1 | 0.007886 |
| 2 | 0.015773 |
| 5 | 0.039431 |
| 10 | 0.078863 |
| 25 | 0.197157 |
| 50 | 0.394314 |
| 100 | 0.788627 |
Sand (Dry) density and calculation basis
Sand (Dry) is represented in this table by a fixed reference density of 1600 kg/m^3, equivalent to 1.6 g/cm^3. Typical dry bulk density; grading affects value.
At this fixed reference, 1 liter of Sand (Dry) corresponds to 1.6 kg, while 1 kg corresponds to 0.625 liters. Its table density is 60.5% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 11 fixed table records labeled Construction materials, the nearest density to Sand (Dry) is Gravel at 1700 kg/m^3: an absolute difference of 100 kg/m^3 (6.3% relative to Sand (Dry)). 2 records have a lower fixed density and 8 have a higher one. The observed range in this labeled group is Topsoil at 1200 kg/m^3 to Granite at 2750 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00788627 kg per tsp (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much kg is 1 tsp (US) of Sand (Dry)?
1 tsp (US) of Sand (Dry) equals 0.00788627 kg on this page.
What density does this Sand (Dry) page use?
This page uses a fixed density of 1600 kg/m^3 for Sand (Dry).
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/kilograms-to-teaspoons-us/sand-dry/) to convert in the opposite direction with the same fixed density basis.