US Cups to Grams for Plastic (HDPE)
Snapshot
For Plastic (HDPE), 1 US Cup equals about 224.758825 Grams. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Plastic (HDPE) at 950 kg/m^3.
- Example: For 0.1 US Cups of Plastic (HDPE), the result is 22.475882 Grams.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
224.758825 Grams (Plastic (HDPE))
SwitchExplanation
The converter converts grams of Plastic (HDPE) from us cups using one fixed density basis of 950 kg/m^3. The same density model is used in the calculator, common values, and mirror page so weight, mass, and volume checks stay aligned.
Typical high-density polyethylene density.
Common Conversion Values
| US Cups (Plastic (HDPE)) | Grams (Plastic (HDPE)) |
|---|---|
| 0.1 | 22.475882 |
| 0.25 | 56.189706 |
| 0.5 | 112.379412 |
| 1 | 224.758825 |
| 2 | 449.517649 |
| 5 | 1,123.794123 |
| 10 | 2,247.588247 |
| 25 | 5,618.970617 |
| 50 | 11,237.941234 |
| 100 | 22,475.882468 |
Plastic (HDPE) density and calculation basis
Plastic (HDPE) is represented in this table by a fixed reference density of 950 kg/m^3, equivalent to 0.95 g/cm^3. Typical high-density polyethylene density.
At this fixed reference, 1 liter of Plastic (HDPE) corresponds to 0.95 kg, while 1 kg corresponds to 1.052632 liters. Its table density is 4.7% lower than the 997 kg/m^3 water reference used in this dataset.
Among the 4 fixed table records labeled Polymers, the nearest density to Plastic (HDPE) is Rubber (Solid) at 1100 kg/m^3: an absolute difference of 150 kg/m^3 (15.8% relative to Plastic (HDPE)). 0 records have a lower fixed density and 3 have a higher one. The observed range in this labeled group is Plastic (HDPE) at 950 kg/m^3 to Plastic (PVC) at 1380 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 224.758825 g per cup (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much g is 1 cup (US) of Plastic (HDPE)?
1 cup (US) of Plastic (HDPE) equals 224.758825 g on this page.
What density does this Plastic (HDPE) page use?
This page uses a fixed density of 950 kg/m^3 for Plastic (HDPE).
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/grams-to-us-cups/plastic-hdpe/) to convert in the opposite direction with the same fixed density basis.