US Cups to Metric Tons for Water
Snapshot
For Water, 1 US Cup equals about 0.000236 Metric Tons. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Water at 997 kg/m^3.
- Example: For 0.1 US Cups of Water, the result is 0.000024 Metric Tons.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
0.000236 Metric Tons (Water)
SwitchExplanation
The converter converts metric tons of Water from us cups using one fixed density basis of 997 kg/m^3. The same density model is used in the calculator, common values, and mirror page so weight, mass, and volume checks stay aligned.
Approximate liquid water density near room temperature.
Common Conversion Values
| US Cups (Water) | Metric Tons (Water) |
|---|---|
| 0.1 | 0.000024 |
| 0.25 | 0.000059 |
| 0.5 | 0.000118 |
| 1 | 0.000236 |
| 2 | 0.000472 |
| 5 | 0.001179 |
| 10 | 0.002359 |
| 25 | 0.005897 |
| 50 | 0.011794 |
| 100 | 0.023588 |
Water density and calculation basis
Water is represented in this table by a fixed reference density of 997 kg/m^3, equivalent to 0.997 g/cm^3. Approximate liquid water density near room temperature.
At this fixed reference, 1 liter of Water corresponds to 0.997 kg, while 1 kg corresponds to 1.003009 liters. Its table density is the same as the 997 kg/m^3 water reference used in this dataset.
Among the 17 fixed table records labeled Liquids, the nearest density to Water is Seawater at 1025 kg/m^3: an absolute difference of 28 kg/m^3 (2.8% relative to Water). 10 records have a lower fixed density and 6 have a higher one. The observed range in this labeled group is Gasoline at 745 kg/m^3 to Honey at 1420 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00023588 t per cup (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much t is 1 cup (US) of Water?
1 cup (US) of Water equals 0.00023588 t on this page.
What density does this Water page use?
This page uses a fixed density of 997 kg/m^3 for Water.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/metric-tons-to-us-cups/water/) to convert in the opposite direction with the same fixed density basis.