US Fluid Ounces to Pounds for Brass
Snapshot
For Brass, 1 US Fluid Ounce equals about 0.554187 Pounds. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Brass at 8,500 kg/m^3.
- Example: For 0.1 US Fluid Ounces of Brass, the result is 0.055419 Pounds.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
0.554187 Pounds (Brass)
SwitchExplanation
The converter converts pounds of Brass from us fluid ounces using one fixed density basis of 8500 kg/m^3. The same density model is used in the calculator, common values, and mirror page so weight, mass, and volume checks stay aligned.
Representative brass alloy density.
Common Conversion Values
| US Fluid Ounces (Brass) | Pounds (Brass) |
|---|---|
| 0.1 | 0.055419 |
| 0.25 | 0.138547 |
| 0.5 | 0.277094 |
| 1 | 0.554187 |
| 2 | 1.108374 |
| 5 | 2.770935 |
| 10 | 5.54187 |
| 25 | 13.854675 |
| 50 | 27.709351 |
| 100 | 55.418701 |
Brass density and calculation basis
Brass is represented in this table by a fixed reference density of 8500 kg/m^3, equivalent to 8.5 g/cm^3. Representative brass alloy density.
At this fixed reference, 1 liter of Brass corresponds to 8.5 kg, while 1 kg corresponds to 0.117647 liters. Its table density is 752.6% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 13 fixed table records labeled Metals, the nearest density to Brass is Bronze at 8800 kg/m^3: an absolute difference of 300 kg/m^3 (3.5% relative to Brass). 6 records have a lower fixed density and 6 have a higher one. The observed range in this labeled group is Aluminum at 2700 kg/m^3 to Gold at 19320 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.554187 lb per fl oz (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much lb is 1 fl oz (US) of Brass?
1 fl oz (US) of Brass equals 0.554187 lb on this page.
What density does this Brass page use?
This page uses a fixed density of 8500 kg/m^3 for Brass.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/pounds-to-us-fluid-ounces/brass/) to convert in the opposite direction with the same fixed density basis.