US Gallons to Grams for Brick
Snapshot
For Brick, 1 US Gallon equals about 6,813.741211 Grams. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Brick at 1,800 kg/m^3.
- Example: For 0.1 US Gallons of Brick, the result is 681.374121 Grams.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
6,813.741211 Grams (Brick)
SwitchExplanation
The converter converts grams of Brick from us gallons using one fixed density basis of 1800 kg/m^3. The same density model is used in the calculator, common values, and mirror page so weight, mass, and volume checks stay aligned.
Representative fired clay brick density.
Common Conversion Values
| US Gallons (Brick) | Grams (Brick) |
|---|---|
| 0.1 | 681.374121 |
| 0.25 | 1,703.435303 |
| 0.5 | 3,406.870606 |
| 1 | 6,813.741211 |
| 2 | 13,627.482422 |
| 5 | 34,068.706056 |
| 10 | 68,137.412112 |
| 25 | 170,343.53028 |
| 50 | 340,687.06056 |
| 100 | 681,374.12112 |
Brick density and calculation basis
Brick is represented in this table by a fixed reference density of 1800 kg/m^3, equivalent to 1.8 g/cm^3. Representative fired clay brick density.
At this fixed reference, 1 liter of Brick corresponds to 1.8 kg, while 1 kg corresponds to 0.555556 liters. Its table density is 80.5% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 11 fixed table records labeled Construction materials, the nearest density to Brick is Gravel at 1700 kg/m^3: an absolute difference of 100 kg/m^3 (5.6% relative to Brick). 4 records have a lower fixed density and 6 have a higher one. The observed range in this labeled group is Topsoil at 1200 kg/m^3 to Granite at 2750 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 6,813.741 g per gal (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much g is 1 gal (US) of Brick?
1 gal (US) of Brick equals 6,813.741 g on this page.
What density does this Brick page use?
This page uses a fixed density of 1800 kg/m^3 for Brick.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/grams-to-us-gallons/brick/) to convert in the opposite direction with the same fixed density basis.