US Gallons to Metric Tons for Honey
Snapshot
For Honey, 1 US Gallon equals about 0.005375 Metric Tons. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Honey at 1,420 kg/m^3.
- Example: For 0.1 US Gallons of Honey, the result is 0.000538 Metric Tons.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
0.005375 Metric Tons (Honey)
SwitchExplanation
The converter converts metric tons of Honey from us gallons using one fixed density basis of 1420 kg/m^3. The same density model is used in the calculator, common values, and mirror page so weight, mass, and volume checks stay aligned.
Representative honey density; moisture content changes value.
Common Conversion Values
| US Gallons (Honey) | Metric Tons (Honey) |
|---|---|
| 0.1 | 0.000538 |
| 0.25 | 0.001344 |
| 0.5 | 0.002688 |
| 1 | 0.005375 |
| 2 | 0.010751 |
| 5 | 0.026876 |
| 10 | 0.053753 |
| 25 | 0.134382 |
| 50 | 0.268764 |
| 100 | 0.537528 |
Honey density and calculation basis
Honey is represented in this table by a fixed reference density of 1420 kg/m^3, equivalent to 1.42 g/cm^3. Representative honey density; moisture content changes value.
At this fixed reference, 1 liter of Honey corresponds to 1.42 kg, while 1 kg corresponds to 0.704225 liters. Its table density is 42.4% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 17 fixed table records labeled Liquids, the nearest density to Honey is Molasses at 1400 kg/m^3: an absolute difference of 20 kg/m^3 (1.4% relative to Honey). 16 records have a lower fixed density and 0 have a higher one. The observed range in this labeled group is Gasoline at 745 kg/m^3 to Honey at 1420 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00537528 t per gal (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much t is 1 gal (US) of Honey?
1 gal (US) of Honey equals 0.00537528 t on this page.
What density does this Honey page use?
This page uses a fixed density of 1420 kg/m^3 for Honey.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/metric-tons-to-us-gallons/honey/) to convert in the opposite direction with the same fixed density basis.