US Gallons to Pounds for Asphalt
Snapshot
For Asphalt, 1 US Gallon equals about 20.028971 Pounds. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Asphalt at 2,400 kg/m^3.
- Example: For 0.1 US Gallons of Asphalt, the result is 2.002897 Pounds.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
20.028971 Pounds (Asphalt)
SwitchExplanation
The converter converts pounds of Asphalt from us gallons using one fixed density basis of 2400 kg/m^3. The same density model is used in the calculator, common values, and mirror page so weight, mass, and volume checks stay aligned.
Typical compacted asphalt density.
Common Conversion Values
| US Gallons (Asphalt) | Pounds (Asphalt) |
|---|---|
| 0.1 | 2.002897 |
| 0.25 | 5.007243 |
| 0.5 | 10.014485 |
| 1 | 20.028971 |
| 2 | 40.057941 |
| 5 | 100.144853 |
| 10 | 200.289707 |
| 25 | 500.724267 |
| 50 | 1,001.448534 |
| 100 | 2,002.897068 |
Asphalt density and calculation basis
Asphalt is represented in this table by a fixed reference density of 2400 kg/m^3, equivalent to 2.4 g/cm^3. Typical compacted asphalt density.
At this fixed reference, 1 liter of Asphalt corresponds to 2.4 kg, while 1 kg corresponds to 0.416667 liters. Its table density is 140.7% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 11 fixed table records labeled Construction materials, the nearest density to Asphalt is Concrete at 2400 kg/m^3: an absolute difference of 0 kg/m^3 (0.0% relative to Asphalt). 6 records have a lower fixed density and 3 have a higher one. 1 other record shares the same fixed density. The observed range in this labeled group is Topsoil at 1200 kg/m^3 to Granite at 2750 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 20.028971 lb per gal (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much lb is 1 gal (US) of Asphalt?
1 gal (US) of Asphalt equals 20.028971 lb on this page.
What density does this Asphalt page use?
This page uses a fixed density of 2400 kg/m^3 for Asphalt.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/pounds-to-us-gallons/asphalt/) to convert in the opposite direction with the same fixed density basis.