US Gallons to Short Tons (US) for Concrete
Snapshot
For Concrete, 1 US Gallon equals about 0.010014 Short Tons (US). Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Concrete at 2,400 kg/m^3.
- Example: For 0.1 US Gallons of Concrete, the result is 0.001001 Short Tons (US).
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
0.010014 Short Tons (US) (Concrete)
SwitchExplanation
The converter converts short tons (us) of Concrete from us gallons using one fixed density basis of 2400 kg/m^3. The same density model is used in the calculator, common values, and mirror page so weight, mass, and volume checks stay aligned.
Typical normal-weight concrete bulk density.
Common Conversion Values
| US Gallons (Concrete) | Short Tons (US) (Concrete) |
|---|---|
| 0.1 | 0.001001 |
| 0.25 | 0.002504 |
| 0.5 | 0.005007 |
| 1 | 0.010014 |
| 2 | 0.020029 |
| 5 | 0.050072 |
| 10 | 0.100145 |
| 25 | 0.250362 |
| 50 | 0.500724 |
| 100 | 1.001449 |
Concrete density and calculation basis
Concrete is represented in this table by a fixed reference density of 2400 kg/m^3, equivalent to 2.4 g/cm^3. Typical normal-weight concrete bulk density.
At this fixed reference, 1 liter of Concrete corresponds to 2.4 kg, while 1 kg corresponds to 0.416667 liters. Its table density is 140.7% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 11 fixed table records labeled Construction materials, the nearest density to Concrete is Asphalt at 2400 kg/m^3: an absolute difference of 0 kg/m^3 (0.0% relative to Concrete). 6 records have a lower fixed density and 3 have a higher one. 1 other record shares the same fixed density. The observed range in this labeled group is Topsoil at 1200 kg/m^3 to Granite at 2750 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.010014 ton (US) per gal (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much ton (US) is 1 gal (US) of Concrete?
1 gal (US) of Concrete equals 0.010014 ton (US) on this page.
What density does this Concrete page use?
This page uses a fixed density of 2400 kg/m^3 for Concrete.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/short-tons-to-us-gallons/concrete/) to convert in the opposite direction with the same fixed density basis.