US Gallons to Short Tons (US) for Methanol
Snapshot
For Methanol, 1 US Gallon equals about 0.003305 Short Tons (US). Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Methanol at 792 kg/m^3.
- Example: For 0.1 US Gallons of Methanol, the result is 0.00033 Short Tons (US).
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
0.003305 Short Tons (US) (Methanol)
SwitchExplanation
The converter converts short tons (us) of Methanol from us gallons using one fixed density basis of 792 kg/m^3. The same density model is used in the calculator, common values, and mirror page so weight, mass, and volume checks stay aligned.
Typical pure methanol density near room temperature.
Common Conversion Values
| US Gallons (Methanol) | Short Tons (US) (Methanol) |
|---|---|
| 0.1 | 0.00033 |
| 0.25 | 0.000826 |
| 0.5 | 0.001652 |
| 1 | 0.003305 |
| 2 | 0.00661 |
| 5 | 0.016524 |
| 10 | 0.033048 |
| 25 | 0.08262 |
| 50 | 0.165239 |
| 100 | 0.330478 |
Methanol density and calculation basis
Methanol is represented in this table by a fixed reference density of 792 kg/m^3, equivalent to 0.792 g/cm^3. Typical pure methanol density near room temperature.
At this fixed reference, 1 liter of Methanol corresponds to 0.792 kg, while 1 kg corresponds to 1.262626 liters. Its table density is 20.6% lower than the 997 kg/m^3 water reference used in this dataset.
Among the 17 fixed table records labeled Liquids, the nearest density to Methanol is Ethanol at 789 kg/m^3: an absolute difference of 3 kg/m^3 (0.4% relative to Methanol). 4 records have a lower fixed density and 12 have a higher one. The observed range in this labeled group is Gasoline at 745 kg/m^3 to Honey at 1420 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00330478 ton (US) per gal (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much ton (US) is 1 gal (US) of Methanol?
1 gal (US) of Methanol equals 0.00330478 ton (US) on this page.
What density does this Methanol page use?
This page uses a fixed density of 792 kg/m^3 for Methanol.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/short-tons-to-us-gallons/methanol/) to convert in the opposite direction with the same fixed density basis.