US Gallons to Short Tons (US) for Wood (Balsa)
Snapshot
For Wood (Balsa), 1 US Gallon equals about 0.000668 Short Tons (US). Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Wood (Balsa) at 160 kg/m^3.
- Example: For 0.1 US Gallons of Wood (Balsa), the result is 0.000067 Short Tons (US).
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
0.000668 Short Tons (US) (Wood (Balsa))
SwitchExplanation
The converter converts short tons (us) of Wood (Balsa) from us gallons using one fixed density basis of 160 kg/m^3. The same density model is used in the calculator, common values, and mirror page so weight, mass, and volume checks stay aligned.
Representative balsa wood density.
Common Conversion Values
| US Gallons (Wood (Balsa)) | Short Tons (US) (Wood (Balsa)) |
|---|---|
| 0.1 | 0.000067 |
| 0.25 | 0.000167 |
| 0.5 | 0.000334 |
| 1 | 0.000668 |
| 2 | 0.001335 |
| 5 | 0.003338 |
| 10 | 0.006676 |
| 25 | 0.016691 |
| 50 | 0.033382 |
| 100 | 0.066763 |
Wood (Balsa) density and calculation basis
Wood (Balsa) is represented in this table by a fixed reference density of 160 kg/m^3, equivalent to 0.16 g/cm^3. Representative balsa wood density.
At this fixed reference, 1 liter of Wood (Balsa) corresponds to 0.16 kg, while 1 kg corresponds to 6.25 liters. Its table density is 84.0% lower than the 997 kg/m^3 water reference used in this dataset.
Among the 5 fixed table records labeled Wood and paper, the nearest density to Wood (Balsa) is Wood (Pine) at 500 kg/m^3: an absolute difference of 340 kg/m^3 (212.5% relative to Wood (Balsa)). 0 records have a lower fixed density and 4 have a higher one. The observed range in this labeled group is Wood (Balsa) at 160 kg/m^3 to Paper at 800 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00066763 ton (US) per gal (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much ton (US) is 1 gal (US) of Wood (Balsa)?
1 gal (US) of Wood (Balsa) equals 0.00066763 ton (US) on this page.
What density does this Wood (Balsa) page use?
This page uses a fixed density of 160 kg/m^3 for Wood (Balsa).
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/short-tons-to-us-gallons/wood-balsa/) to convert in the opposite direction with the same fixed density basis.