US Pints to Grams for Wood (Oak)
Snapshot
For Wood (Oak), 1 US Pint equals about 354.882355 Grams. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Wood (Oak) at 750 kg/m^3.
- Example: For 0.1 US Pints of Wood (Oak), the result is 35.488235 Grams.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
354.882355 Grams (Wood (Oak))
SwitchExplanation
The converter converts grams of Wood (Oak) from us pints using one fixed density basis of 750 kg/m^3. The same density model is used in the calculator, common values, and mirror page so weight, mass, and volume checks stay aligned.
Representative hardwood oak density.
Common Conversion Values
| US Pints (Wood (Oak)) | Grams (Wood (Oak)) |
|---|---|
| 0.1 | 35.488235 |
| 0.25 | 88.720589 |
| 0.5 | 177.441177 |
| 1 | 354.882355 |
| 2 | 709.76471 |
| 5 | 1,774.411774 |
| 10 | 3,548.823548 |
| 25 | 8,872.058869 |
| 50 | 17,744.117738 |
| 100 | 35,488.235475 |
Wood (Oak) density and calculation basis
Wood (Oak) is represented in this table by a fixed reference density of 750 kg/m^3, equivalent to 0.75 g/cm^3. Representative hardwood oak density.
At this fixed reference, 1 liter of Wood (Oak) corresponds to 0.75 kg, while 1 kg corresponds to 1.333333 liters. Its table density is 24.8% lower than the 997 kg/m^3 water reference used in this dataset.
Among the 5 fixed table records labeled Wood and paper, the nearest density to Wood (Oak) is Cardboard at 700 kg/m^3: an absolute difference of 50 kg/m^3 (6.7% relative to Wood (Oak)). 3 records have a lower fixed density and 1 have a higher one. The observed range in this labeled group is Wood (Balsa) at 160 kg/m^3 to Paper at 800 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 354.882355 g per pt (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much g is 1 pt (US) of Wood (Oak)?
1 pt (US) of Wood (Oak) equals 354.882355 g on this page.
What density does this Wood (Oak) page use?
This page uses a fixed density of 750 kg/m^3 for Wood (Oak).
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/grams-to-us-pints/wood-oak/) to convert in the opposite direction with the same fixed density basis.