US Pints to Kilograms for Topsoil
Snapshot
For Topsoil, 1 US Pint equals about 0.567812 Kilograms. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Topsoil at 1,200 kg/m^3.
- Example: For 0.1 US Pints of Topsoil, the result is 0.056781 Kilograms.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
0.567812 Kilograms (Topsoil)
SwitchExplanation
The converter converts kilograms of Topsoil from us pints using one fixed density basis of 1200 kg/m^3. The same density model is used in the calculator, common values, and mirror page so weight, mass, and volume checks stay aligned.
Typical loose topsoil bulk density.
Common Conversion Values
| US Pints (Topsoil) | Kilograms (Topsoil) |
|---|---|
| 0.1 | 0.056781 |
| 0.25 | 0.141953 |
| 0.5 | 0.283906 |
| 1 | 0.567812 |
| 2 | 1.135624 |
| 5 | 2.839059 |
| 10 | 5.678118 |
| 25 | 14.195294 |
| 50 | 28.390588 |
| 100 | 56.781177 |
Topsoil density and calculation basis
Topsoil is represented in this table by a fixed reference density of 1200 kg/m^3, equivalent to 1.2 g/cm^3. Typical loose topsoil bulk density.
At this fixed reference, 1 liter of Topsoil corresponds to 1.2 kg, while 1 kg corresponds to 0.833333 liters. Its table density is 20.4% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 11 fixed table records labeled Construction materials, the nearest density to Topsoil is Cement Powder at 1440 kg/m^3: an absolute difference of 240 kg/m^3 (20.0% relative to Topsoil). 0 records have a lower fixed density and 10 have a higher one. The observed range in this labeled group is Topsoil at 1200 kg/m^3 to Granite at 2750 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.567812 kg per pt (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much kg is 1 pt (US) of Topsoil?
1 pt (US) of Topsoil equals 0.567812 kg on this page.
What density does this Topsoil page use?
This page uses a fixed density of 1200 kg/m^3 for Topsoil.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/kilograms-to-us-pints/soil-topsoil/) to convert in the opposite direction with the same fixed density basis.