US Pints to Metric Tons for Steel (Carbon)
Snapshot
For Steel (Carbon), 1 US Pint equals about 0.003714 Metric Tons. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Steel (Carbon) at 7,850 kg/m^3.
- Example: For 0.1 US Pints of Steel (Carbon), the result is 0.000371 Metric Tons.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
0.003714 Metric Tons (Steel (Carbon))
SwitchExplanation
The converter converts metric tons of Steel (Carbon) from us pints using one fixed density basis of 7850 kg/m^3. The same density model is used in the calculator, common values, and mirror page so weight, mass, and volume checks stay aligned.
Standard engineering density for carbon steel.
Common Conversion Values
| US Pints (Steel (Carbon)) | Metric Tons (Steel (Carbon)) |
|---|---|
| 0.1 | 0.000371 |
| 0.25 | 0.000929 |
| 0.5 | 0.001857 |
| 1 | 0.003714 |
| 2 | 0.007429 |
| 5 | 0.018572 |
| 10 | 0.037144 |
| 25 | 0.092861 |
| 50 | 0.185722 |
| 100 | 0.371444 |
Steel (Carbon) density and calculation basis
Steel (Carbon) is represented in this table by a fixed reference density of 7850 kg/m^3, equivalent to 7.85 g/cm^3. Standard engineering density for carbon steel.
At this fixed reference, 1 liter of Steel (Carbon) corresponds to 7.85 kg, while 1 kg corresponds to 0.127389 liters. Its table density is 687.4% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 13 fixed table records labeled Metals, the nearest density to Steel (Carbon) is Stainless Steel at 8000 kg/m^3: an absolute difference of 150 kg/m^3 (1.9% relative to Steel (Carbon)). 4 records have a lower fixed density and 8 have a higher one. The observed range in this labeled group is Aluminum at 2700 kg/m^3 to Gold at 19320 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00371444 t per pt (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much t is 1 pt (US) of Steel (Carbon)?
1 pt (US) of Steel (Carbon) equals 0.00371444 t on this page.
What density does this Steel (Carbon) page use?
This page uses a fixed density of 7850 kg/m^3 for Steel (Carbon).
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/metric-tons-to-us-pints/steel-carbon/) to convert in the opposite direction with the same fixed density basis.