US Pints to Pounds for Plastic (PET)
Snapshot
For Plastic (PET), 1 US Pint equals about 1.429151 Pounds. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Plastic (PET) at 1,370 kg/m^3.
- Example: For 0.1 US Pints of Plastic (PET), the result is 0.142915 Pounds.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
1.429151 Pounds (Plastic (PET))
SwitchExplanation
The converter converts pounds of Plastic (PET) from us pints using one fixed density basis of 1370 kg/m^3. The same density model is used in the calculator, common values, and mirror page so weight, mass, and volume checks stay aligned.
Typical PET polymer density.
Common Conversion Values
| US Pints (Plastic (PET)) | Pounds (Plastic (PET)) |
|---|---|
| 0.1 | 0.142915 |
| 0.25 | 0.357288 |
| 0.5 | 0.714575 |
| 1 | 1.429151 |
| 2 | 2.858301 |
| 5 | 7.145753 |
| 10 | 14.291505 |
| 25 | 35.728763 |
| 50 | 71.457526 |
| 100 | 142.915051 |
Plastic (PET) density and calculation basis
Plastic (PET) is represented in this table by a fixed reference density of 1370 kg/m^3, equivalent to 1.37 g/cm^3. Typical PET polymer density.
At this fixed reference, 1 liter of Plastic (PET) corresponds to 1.37 kg, while 1 kg corresponds to 0.729927 liters. Its table density is 37.4% higher than the 997 kg/m^3 water reference used in this dataset.
Among the 4 fixed table records labeled Polymers, the nearest density to Plastic (PET) is Plastic (PVC) at 1380 kg/m^3: an absolute difference of 10 kg/m^3 (0.7% relative to Plastic (PET)). 2 records have a lower fixed density and 1 have a higher one. The observed range in this labeled group is Plastic (HDPE) at 950 kg/m^3 to Plastic (PVC) at 1380 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 1.429151 lb per pt (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much lb is 1 pt (US) of Plastic (PET)?
1 pt (US) of Plastic (PET) equals 1.429151 lb on this page.
What density does this Plastic (PET) page use?
This page uses a fixed density of 1370 kg/m^3 for Plastic (PET).
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/pounds-to-us-pints/plastic-pet/) to convert in the opposite direction with the same fixed density basis.