US Quarts to Metric Tons for Kerosene
Snapshot
For Kerosene, 1 US Quart equals about 0.000767 Metric Tons. Conversion Encyclopedia keeps one material-density basis on this page so the calculator, common values, and reverse page stay aligned.
- Material basis: Kerosene at 810 kg/m^3.
- Example: For 0.1 US Quarts of Kerosene, the result is 0.000077 Metric Tons.
- Use the reverse page if you need the opposite direction with the same basis.
Use the interactive calculator below for custom values and the common-value table for quick checks.
Converter Calculator
0.000767 Metric Tons (Kerosene)
SwitchExplanation
The converter converts metric tons of Kerosene from us quarts using one fixed density basis of 810 kg/m^3. The same density model is used in the calculator, common values, and mirror page so weight, mass, and volume checks stay aligned.
Representative kerosene density near room temperature.
Common Conversion Values
| US Quarts (Kerosene) | Metric Tons (Kerosene) |
|---|---|
| 0.1 | 0.000077 |
| 0.25 | 0.000192 |
| 0.5 | 0.000383 |
| 1 | 0.000767 |
| 2 | 0.001533 |
| 5 | 0.003833 |
| 10 | 0.007665 |
| 25 | 0.019164 |
| 50 | 0.038327 |
| 100 | 0.076655 |
Kerosene density and calculation basis
Kerosene is represented in this table by a fixed reference density of 810 kg/m^3, equivalent to 0.81 g/cm^3. Representative kerosene density near room temperature.
At this fixed reference, 1 liter of Kerosene corresponds to 0.81 kg, while 1 kg corresponds to 1.234568 liters. Its table density is 18.8% lower than the 997 kg/m^3 water reference used in this dataset.
Among the 17 fixed table records labeled Liquids, the nearest density to Kerosene is Methanol at 792 kg/m^3: an absolute difference of 18 kg/m^3 (2.2% relative to Kerosene). 5 records have a lower fixed density and 11 have a higher one. The observed range in this labeled group is Gasoline at 745 kg/m^3 to Honey at 1420 kg/m^3. This is a numerical comparison, not a claim that the materials are interchangeable.
For this direction, mass is calculated as volume multiplied by density after normalizing the units to cubic meters and kilograms. The resulting page multiplier is 0.00076655 t per qt (US).
The fixed value supports repeatable calculations but is not a batch, grade, supplier, or laboratory specification. Use a measured or certified density when those conditions control the result.
Frequently Asked Questions
How much t is 1 qt (US) of Kerosene?
1 qt (US) of Kerosene equals 0.00076655 t on this page.
What density does this Kerosene page use?
This page uses a fixed density of 810 kg/m^3 for Kerosene.
Is there a reverse page with the same density basis?
Yes. Use the mirror page (/material-density/metric-tons-to-us-quarts/kerosene/) to convert in the opposite direction with the same fixed density basis.