Focal length (mm) to Horizontal angle of view (degrees) for Compact 1/2.5" class
1 Focal length (mm) = 141.703725 Horizontal angle of view (degrees) ยท camera-equivalence calculation for Compact 1/2.5" class
Direct Answer
On Compact 1/2.5" class, a 50 mm lens gives about 6.593189 horizontal angle of view
This result uses the fixed Compact 1/2.5" class sensor profile (crop factor 6.8).
For 14 Focal length (mm), this gives 23.248791 Horizontal angle of view (degrees) on Compact 1/2.5" class.
Converter Calculator
141.703725 Horizontal angle of view (degrees)
SwitchExplanation
Formula: HFOV = 2 x atan(5.76 / (2 x focal_mm)) in degrees. Why: this page keeps Compact 1/2.5" class fixed, so crop factor and sensor width stay explicit for every calculation.
Compact 1/2.5" class: a sensor profile with crop factor 6.8 and sensor width (horizontal) 5.76 mm, used as the fixed framing basis for this page.
Focal length (mm): a camera-equivalence quantity in this family that depends on the selected crop model.
Horizontal angle of view (degrees): a camera-equivalence quantity in this family that depends on the selected crop model.
This route is useful when you know the focal length on Compact 1/2.5" class and want the resulting horizontal framing angle.
This page is sensor-profile dependent rather than universal because camera equivalence changes with sensor geometry (Compact 1/2.5" class).
Common Conversion Values
| Focal length (mm) | Horizontal angle of view (degrees) |
|---|---|
| 14 | 23.248791 |
| 24 | 13.685547 |
| 28 | 11.745257 |
| 35 | 9.408053 |
| 50 | 6.593189 |
| 70 | 4.711967 |
| 85 | 3.881147 |
| 135 | 2.444249 |
| 200 | 1.650004 |
Frequently Asked Questions
Which sensor assumptions are fixed for focal length mm to horizontal angle of view (degrees)?
Focal length mm to horizontal angle of view (degrees) is fixed to Compact 1/2.5" class, crop factor 6.8, sensor width 5.76 mm.
How do I reverse mm to deg for Compact 1/2.5" class?
Use the opposite-direction page for Compact 1/2.5" class to convert horizontal angle of view (degrees) back to focal length (mm) with the same sensor assumptions.
Can focal length mm to horizontal angle of view (degrees) replace full lens-design simulation?
No. Focal length mm to horizontal angle of view (degrees) provides framing and geometry approximations, not full optical-model behavior.