Horizontal angle of view (degrees) to Focal length (mm) for APS-C Sony/Fuji 23.5mm
1 Horizontal angle of view (degrees) = 1,346.416639 Focal length (mm) ยท camera-equivalence calculation for APS-C Sony/Fuji 23.5mm
Direct Answer
On APS-C Sony/Fuji 23.5mm, a 50 horizontal angle of view needs about a 25.197956 mm lens
This result uses the fixed APS-C Sony/Fuji 23.5mm sensor profile (crop factor 1.5).
To reach 14 Horizontal angle of view (degrees), you need 95.696071 Focal length (mm) on APS-C Sony/Fuji 23.5mm.
Converter Calculator
1,346.416639 Focal length (mm)
SwitchExplanation
Formula: focal_mm = 23.5 / (2 x tan(HFOV/2)). Why: this page keeps APS-C Sony/Fuji 23.5mm fixed, so crop factor and sensor width stay explicit for every calculation.
APS-C Sony/Fuji 23.5mm: a sensor profile with crop factor 1.5 and sensor width (horizontal) 23.5 mm, used as the fixed framing basis for this page.
Horizontal angle of view (degrees): a camera-equivalence quantity in this family that depends on the selected crop model.
Focal length (mm): a camera-equivalence quantity in this family that depends on the selected crop model.
This route is useful when you know the target horizontal framing angle and need the focal length required on APS-C Sony/Fuji 23.5mm.
This page is sensor-profile dependent rather than universal because camera equivalence changes with sensor geometry (APS-C Sony/Fuji 23.5mm).
Common Conversion Values
| Horizontal angle of view (degrees) | Focal length (mm) |
|---|---|
| 14 | 95.696071 |
| 24 | 55.279404 |
| 28 | 47.126676 |
| 35 | 37.266239 |
| 50 | 25.197956 |
| 70 | 16.780739 |
| 85 | 12.822875 |
| 135 | 4.867009 |
| 200 | -2.071842 |
Frequently Asked Questions
Which sensor assumptions are fixed for horizontal angle of view (degrees) to focal length mm?
Horizontal angle of view (degrees) to focal length mm is fixed to APS-C Sony/Fuji 23.5mm, crop factor 1.5, sensor width 23.5 mm.
How do I reverse deg to mm for APS-C Sony/Fuji 23.5mm?
Use the opposite-direction page for APS-C Sony/Fuji 23.5mm to convert focal length (mm) back to horizontal angle of view (degrees) with the same sensor assumptions.
Can horizontal angle of view (degrees) to focal length mm replace full lens-design simulation?
No. Horizontal angle of view (degrees) to focal length mm provides framing and geometry approximations, not full optical-model behavior.